 |
 |
We
perform both Aluminum Oxide and Glass Bead abrasive blasting. |
|
|
Blast finishing operations
have a wide variety of purposes. These can range from the removal
of contaminants, such as, scale, oxidation/rust and excess flux from
brazing to providing a clean and properly prepared surface for bonding
of subsequent coating and plating operations. CTI’s blasting
operations are controlled in accordance with Nadcap requirements.
Each operator controlled variable (i.e. blast pressure, blast media
and offset distances) is documented for each lot of hardware processed.
All operators are trained in proper blasting techniques and documented
instructions do not allow for deviation outside of predetermined parameters.
|
